Design Your Home Around A Kitchen Faucet Sprayer

ALL ABOUT KITCHEN FAUCET

What is a 4 Hole Kitchen Faucet

When choosing a new kitchen faucet, there are many features to consider, from handle styles to spout options. Perhaps the most important consideration, however, is mounting style. When purchasing a faucet, homeowners need to make sure that their preferred mounting style is compatible with their sink’s layout.

Inspect the Sink

Before searching for a new faucet, homeowners have to inspect their sink. Each sink has a specific number of mounting holes. When it comes to kitchen sinks, most come equipped with one to four mounting holes. The more holes the sink has, the more faucet features they can accommodate. Ahead, learn more about the various mounting hole configurations.

One Hole Faucets

When sinks have one mounting hole, they are outfitted with one-handle faucets.

Two Hole Faucets

Two hole faucets come in several configurations. Some of them have the same basic structure as single hole faucets, and the second hole is used for an additional feature, like a soap dispenser. Other two hole faucets use a stylish bridge structure.

Three Hole Faucets

Many kitchen sinks are equipped with three hole faucets; the faucet is installed in the middle hole, and the two handles are installed on the outer holes. While this layout is standard, three-hole configurations can sometimes accommodate additional sink features. For example, pull-out sprayers do not require an extra hole, and they’re often used with three hole faucets.

Four Hole Faucets

Four-hole faucets are also very popular, as they allow for greater versatility than the other options. The faucet uses one hole, the handles use two, and an additional feature is installed in the fourth hole. These features range from dispensers to sprayers to air gaps.

 

Should Be Leak-free for Lifetime

Changing gaskets and washers after every few months belongs to the past. Also, the valves used in modern kitchen faucets have significantly evolved. Most faucets now contain hard ceramics as valves, which are sometimes covered with diamond. With the use of these valves, it’s almost impossible for them to wear out as fast as they used to. Also, they don’t leak their entire lifetime. Therefore, if you find yourself constantly changing gaskets and washers, it’s time to invest in a quality kitchen faucet, and you will not come across such issues anymore. Apart from saving you money and time, the best kitchen faucet will also ensure a stream and precise water flow.

 

Special Features

  • The most popular faucet feature lately is an integrated pull-down or pull-out spray. Sleeker than the traditional side spray, these allow for the ultimate in coverage and flexibility, and free up space on the sink deck or counter. The best pull-sprays will use braided nylon or even braided stainless steel sheathing on their hoses for extended life.
  • When looking for a pull spray faucet, take extra care to read listings and reviews carefully. Because they’re handled more than a traditional faucet, the build quality of these faucets has to be superior if they’re to hold up to the rigors of a busy kitchen.
  • If you’re more interested in a side sprayer, be sure that your new sink will have the correct number of holes, or that you can successfully add a hole to your existing sink.
  • ADA-compliant faucets will be labeled as such, adhering to the various specifications regarding range and ease of operation. Be aware that some faucets have multiple handle options, and often only one of those options (usually lever or wrist blade handles) will be ADA-compliant – so purchase carefully! Sinks have even more ADA standards to meet, so make sure everything is up to snuff there, as well.
  • Touchless faucets are a dream come true for germaphobes, and another option rising in popularity. Rather than having to physically manipulate the faucet controls when your hands are covered in raw chicken, a simple wave in front of the sensor (or with some models, a light tap with the wrist/forearm – similar to a touch lamp) turns the faucet on and off. These faucets do require power, supplied by batteries or an AC power adapter; some models will allow for either. You’ll need to make sure you have an electrical outlet nearby, or spare batteries on-hand.

 

Check the Water Lines

Make sure the new kitchen faucet you want is compatible with the water supply lines. Look under your sink towards the bottom of the cabinet and note the size of the existing water line and the shutoff valves.

Here are a few guidelines to use when checking your water lines and valve:

  • If you’re unsure what size your water lines are, measure them with a measuring tape.
  • Though you may have to hunt for it, the size should be etched onto the valve.
  • Note that an older home may not have a shutoff valve.
  • Many newer faucets come with 3/8-inch flex lines attached. If the existing water shutoff valves are 1/2-inch in size, you’ll need to change out the shut-off valves to 3/8-inch valves before installing the new faucet.
  • It’s typically a good idea to replace the shut-off valves when installing a new faucet, anyhow, since an old valve may fail if you need to shut off the water for leaks or other repairs.

 

Related Questions

My faucet hole size is too small for the faucet I purchased recently. What should I do? You have two options. One, to exchange the recently purchased faucet with one that matches the configuration. Or, to increase the hole size to accommodate the purchased faucet. You can either do it yourself using a power drill or hire a professional in your area.

 How to cover extra sink holes? You can use escutcheon plates to cover the extra sink holes. If the holes are too far apart, you can use single-hole cover plates to cover them up. Most faucets come with extra cover plates in case you need them.

What Is The Ideal Thickness Of A Faucet Hole? Faucet hole thicknesses can vary from fixture to fixture. Thus, it would be wise to refer to the specification to find out the maximum deck thickness.

How Many Holes Are Required For A Faucet Installation? The number of holes required for a faucet installation depends on the type of fixture. Generally, they tend to range between single to four hole fixtures. Where, the soap dispenser occupies the fourth hole.

Can I drill my own faucet hole? Yes, you can. Choose the appropriate bit for the hole and use a power drill with a guide to do the job. First, make sure you mark exactly where you need to drill. Never drill on the actual sink before practicing a few times on a slab or similar material. Once you get the feel for it, you can drill your sink. Be steady when holding the drill. While drilling, apply pressure gradually, allowing the drill to do the work.